Galeria
0 obrazy
kartinki 2
kartinki v tekst
produkt
slider
High power buses
Canalis KT is designed for high power transport and distribution from 800A to 5000A. Its high degree of protection (IP55) protects it against water projections, sprinklers and dust. Its compact design and robustness (IK08) mean it can be used in industrial applications, shopping centres, tertiary buildings and infrastructures.
Technical characteristics:
- Busbar trunking rated current:Tap-off units rated current: 25 to 1000A
- 800 to 4000A, aluminium conductors
- 1000 to 5000A, copper conductors
- Number of active conductors: 3L+PE, 3L+N+PE, 3L+N+PER (PER = reinforced PE)
- Protection index: IP55, IPxxD, sprinkler resistant
- Insulation type: Polyester class B (130°C withstand) halogen free
- Length of busbar trunking sections: 4m and 2m or made to order 0.5m to 3m
- Surface treatment: RAL 9001 prelacquered sheet steel
- Regulations: compliant with IEC 61439-1 & 6
Benefits
-
Modular and upgradeable system
-
Quick and easy assembly
-
Safety
-
A fool-proofed system avoids a unit being installed or removed under load
-
Live parts are totally inaccessible
- Tap-off units fully compatible with Canalis KS
-
Excellent contacts: a life time guarantee
-
Halogen free: not emission of any fumes or toxic gases in the event of fire
-
High protection index IP 55 for all types of buildings
-
Dismantled, re-used and entirely recyclable
Applications
-
Industrial buildings: industrial sites, workshops, farm buildings, logistic centres, etc.
-
Commercial/Tertiary buildings: shopping malls, hyper/supermarkets, hotels, elderly people's homes, technical schools, sports rooms
-
Critical buildings: data centres, hospitals
-
Marine: cruise liners
PD bus system has been designed with the purpose of transmission and distribution of high voltage electric power in the range of the rated current from 1000 to 6000 A. The compact design and low impedance allow reducing the voltage drop and power loss making the PD systems suitable for the power transmission over long distances.
|
Due to the use of the corresponding connections the buses can be connected to transformers, generators and switchgears. Direct segments of the PD system are made in two versions: distribution and transmission. Distribution segments are designed for the distribution of electricity and equipped with branch-off sockets. Transmission segments having no junction sockets are used, for example, for the transformer connection to the distribution device. |
 |
The design of the PD bus system prevents air circulation inside its case and thus prevents the spread of fire. This system does not require the use of internal fire-resistant protective barriers. The system uses elements made of self-extinguishing plastic.
